C172S Pad3.5
Publisher Description
Gyronimo Performance Pad -Cessna 172 S-
The ultimate flight computer for Mass & Balance and Performance.
Calculate and interpolate performance data using the actual values from the Cessna 172 S Pilot's Operating Handbook.
(Note - this app does not provide updated POH data. For flight planning, always use the original POH of the airplane you will be flying)
Performance Results are updated immediately and displayed in high-resolution graphics, enhanced for the iPad Retina displays.
Change all important values using sliders.
Experiment with the results and create "what if" scenarios in no time.
Find your optimal cruise altitude, takeoff ground roll, landing distance,
climb data and stall speeds.
The Performance Pad C172S has seven main pages:
1. The Mass & Balance (or Weight & Balance) Page
Calculates Center of Gravity, Moments, Takeoff and Zero Fuel Mass as well as Percent MAC (% MAC).
Set person and baggage weights in seconds using the convenient sliders.
Check if the CG is within limits using three graphical displays
- Moment Envelope
- CG envelope
- Aircraft axis
or see a complete load manifest that you can send to your email address to quickly prove that you have completed the Weight & Balance for your flight.
2. The Takeoff Page
Using the actual data from the C172S Operating Handbook
the Performance Pad calculates and displays Ground Roll and Landing Distance
based on:
- Aircraft Mass
- Takeoff Elevation in MSL (Pressure Altitude and Density Altitude will be computed)
- Outside Air Temperature (OAT)
- Altimeter Setting
- Runway Conditions (i.e. paved dry to grass or extra factors up to 100%)
- Wind Conditions
Wind Components Computer
- Use the Wind Components page to determine your headwind or tailwind component.
Rotate the wind dial to set wind direction, set windspeed and the results will be
transferred to your takeoff computations automatically!
3. The Climb page
Calculates time, fuel and distance based on
- Difference between Takeoff Elevation and intended Flight Level
- Altimeter Setting
- Outside Air Temperature (OAT)
- Altimeter Setting
- Headwind or Tailwind Component
The Rate of Climb and Climb Speed will be displayed.
4. The Cruise Page
Using the actual data from the Pilot's Operating Handbook you can
determine the optimal cruise altitude based on
- Trip Distance
- Flight Level
- Engine RPM
- Temperature
- Wind and Altimeter Setting
and calculate Break Horse Power (% BHP), Fuel Flow and True Airspeed
The Max Range and Range including Reserve will be displayed graphically.
The Fuel Management allows to input Reserve Time for Contingency, Alternate and Final Reserve.
The Fuel Usage is displayed graphically.
5. Landing Page
Calculates Ground Roll and Landing Distance based on wind, elevation, altimeter setting etc.
Use the Wind Components Computer to quickly determine head- or tailwind components
6. Stall Speed Page.
Calculates The Stall Speed based on Bank Angle and Flap Settings.
Stall Speed will be computed as KIAS and KCAS using the actual values from the Cessna POH.
7. Setup
- Load and Save up to five Aircraft Settings and Scenarios.
- Send a Mass & Balance Summary to your email address.
- Visit our video channel and watch tutorials and video manuals.
Disclaimer:
The Gyronimo Performance Pad is a student, professional pilot, and flight instructor assistance tool for plausibility checks and flight training only. All graphics and data provided in this application are used as examples. For flight planning the ORIGINAL Pilot’s Operating Handbook must be used! Performance values can vary significantly with aircraft or environmental conditions and also with your pilot skills. Always consider safety margins for you and the aircraft you are flying.
Version History increased percentage for runway conditions (takeoff and landing) 3.5 09/20/2018 updated lbs/kg conversion 3.4 07/10/2018 improved lbs/kg conversion 3.3 06/18/2017 added manual inputs for wind component computations 3.2 06/03/2016 added manual input option for all values 3.0 05/25/2016 Updated wind computation on takeoff page 2.5 01/03/2015 plan mode CG graphic updated 2.4 12/30/2014 Added variable arm for pilot seat. 2.3 12/29/2014 Updated CG position display on aircraft 2.2 09/26/2014 Updated Summary Page 2.1 04/02/2014 update to iOS7, improves stability on iPad 2 and iPad Mini. 2.0 02/13/2014 corrected initial temperature display 1.3 12/24/2013 Takeoff calculation updated. 1.2 02/13/2013 Added items to flight summary page. 1.1 12/17/2012 1 11/07/2012
About C172S Pad
The company that develops C172S Pad is Gyronimo, LLC. The latest version released by its developer is 3.5.
To install C172S Pad on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-16 and was downloaded 5 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the C172S Pad as malware if the download link is broken.
How to install C172S Pad on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the C172S Pad is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After C172S Pad is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 3.5
posted on 2026-10-16
Version History increased percentage for runway conditions (takeoff and landing) 3.5 09/20/2018 updated lbs/kg conversion 3.4 07/10/2018 improved lbs/kg conversion 3.3 06/18/2017 added manual inputs for wind component computations 3.2 06/03/2016 added manual input option for all values 3.0 05/25/2016 Updated wind computation on takeoff page 2.5 01/03/2015 plan mode CG graphic updated 2.4 12/30/2014 Added variable arm for pilot seat. 2.3 12/29/2014 Updated CG position display on aircraft 2.2 09/26/2014 Updated Summary Page 2.1 04/02/2014 update to iOS7, improves stability on iPad 2 and iPad Mini. 2.0 02/13/2014 corrected initial temperature display 1.3 12/24/2013 Takeoff calculation updated. 1.2 02/13/2013 Added items to flight summary page. 1.1 12/17/2012 1 11/07/2012
version 3.5
posted on 2018-09-20
Sep 20, 2018
Version 3.5
increased percentage for runway conditions (takeoff and landing)
version 3.5
posted on 2018-09-20
increased percentage for runway conditions (takeoff and landing)